National Item Identification Number

01-500-6552

National Stock Number

Item Name

WASHER,FLAT

Federal Supply Class

5310

Description

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Commercial and Government Entity Code (Supplier Data)

---

049V9

---

BRIGHT BOLT ENTERPRISES INC
401 N 17TH ST STE 6
LAS CRUCES
NM
88005
505-524-4111

---

2J641

---

DH INSTRUMENTS INC
4765 E BEAUTIFUL LN
PHOENIX
AZ
85044
602-431-9400

---

3L891

---

STANDARD BOLT NUT AND SCREW CO
3838 E GROVE ST
PHOENIX
AZ
85040
602-437-0551

---

Reference Numbers (Part Numbers)

DIN 433-M4
100918-Z
40NWSFS

Required Categories

MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S

Required Description

STEEL COMP 304 OVERALL
4.3 MILLIMETERS NOMINAL
1 ROUND
8.0 MILLIMETERS NOMINA