National Item Identification Number
01-500-7462
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F2758
CNH FRANCE
R DES MEUNIERS
LE PLESSIS BELLEVILLE
60330
FRANCE
0344632700
0BHC4
MICO INC
MICO WEST DIV
701 E FRANCIS ST
ONTARIO
CA
91761
909-947-4077
Reference Numbers (Part Numbers)
100673A1
33-115-179
Required Categories
MATERIAL
III END ITEM IDENTIFICATION
Required Description
STEEL OVERALL
BRAKE ACTUATORS