National Item Identification Number
01-501-9787
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F2758
CNH FRANCE
R DES MEUNIERS
LE PLESSIS BELLEVILLE
60330
FRANCE
0344632700
K5597
AMEY FLEET SERVICES LTD
APPLEFORD ROAD
SUTTON COURTENAY ABINGDON
OX14 4PP
UNITED KINGDOM
01235 848773
10988
Reference Numbers (Part Numbers)
225913A1
225913A1
225913A1
Required Categories
III END ITEM IDENTIFICATION
Required Description
HEAVY EQUIPMENT