National Item Identification Number
01-508-7330
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
04804
NORTHROP GRUMMAN SYSTEMS CORP
ES POWER CONTROL SYSTEMS - MS8910
7301 SYKESVILLE RD
SYKESVILLE
MD
21784
410-552-2455
Reference Numbers (Part Numbers)
MS51496P83
166000PC
Required Categories
DEPARTURE FROM CITED DOCUMENT
CRITICALITY CODE JUSTIFICATION
SPEC/STD CONTROLL
Required Description
MATERIAL WILL BE IN ACCORDANCE WITH NAVICP ACTIVITY HX QUALITY CONTROL, MANUFACT
