National Item Identification Number
00-205-8341
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
0AT62
30760
INGERSOLL RAND CO
200 CHESTNUT RIDGE RD
636
WESTWOOD
NJ
07675
201-573-0123
30760
INGERSOLL RAND CO
200 CHESTNUT RIDGE RD
636
WESTWOOD
NJ
07675
201-573-0123
0AT62
Reference Numbers (Part Numbers)
X1026T46
X1026T46
X1026T46
100340
30A11C0130X19
30A11C0130X19
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
COPPER OVERALL
0.875 INCHES NOMINAL
1 ROUND
1.469 INCHES NOMINAL
1 ROUND
1