National Item Identification Number
01-524-9409
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
K4244
BAE SYSTEMS LAND SYSTEMS MUNITIONS
ND ORDNANCE LTD
COMMERCIAL DEPT CO8
BARROW IN FURNESS
LA14 1AF
UNITED KINGDOM
01229 874346
0E8E2
SCHNORR-STAFFORD CONSTRUCTION INC
2745 BERWICK CT
COLORADO SPRINGS
CO
80918
Reference Numbers (Part Numbers)
LP674-700900-M10
700900
Required Categories
III END ITEM IDENTIFICATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY
Required Description
LW155 HOWITZER
WASHER, HDS, LOAD