National Item Identification Number
01-525-0113
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
K4244
BAE SYSTEMS LAND SYSTEMS MUNITIONS
ND ORDNANCE LTD
COMMERCIAL DEPT CO8
BARROW IN FURNESS
LA14 1AF
UNITED KINGDOM
01229 874346
9M527
SCHNORR CORP
4355 VARSITY DR STE A
ANN ARBOR
MI
48108
734-677-2683
Reference Numbers (Part Numbers)
LP399-M24-CR-1-4122
S24CR1.4122
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL CORROSION RESISTING OVERALL
25.6 MILLIMETERS NOMINAL
1 ROUND
38.0 MILLI