National Item Identification Number
01-530-1692
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
5T389
WASP INC
20631 STATE HWY 55
249
GLENWOOD
MN
56334
320-634-5126
3HCG0
BUILDING FASTENERS OF MINNESOTA
INCORPORATED
2827 ANTHONY LN S
MINNEAPOLIS
MN
55418
612-788-7468
Reference Numbers (Part Numbers)
H001008
USSFZ 038
Required Categories
MATERIAL
SURFACE TREATMENT
HARDNESS RATING
HOLE DIAMETER
PERIPHERAL SHAPE ST
Required Description
STEEL COMP 1006 OR
STEEL COMP 1008 OR
STEEL COMP 1009 OR
STEEL COMP 1010 OR;