National Item Identification Number
01-535-7309
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
33SR4
MAINTENANCE CENTER ALBANY OF MARINE
CORPS LOGISTICS COMMAND
MARINE CORP LOGISTICS BASE BLDG 2200
814 RADFORD BLVD STE 20324
ALBANY
GA
31704
229-639-5301
Reference Numbers (Part Numbers)
W221NAAN050SN014NNCF1
Required Categories
Required Description