National Item Identification Number
01-537-7189
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
94259
WESTINGHOUSE ELECTRIC CORP
BETTIS ATOMIC POWER LABORATORY
814 PITTSBURGH MCKEESPORT BLVD
79
WEST MIFFLIN
PA
15122
412-476-5090
39428
Reference Numbers (Part Numbers)
6271E42IT16
90805A191
Required Categories
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
CRITICALITY CODE JUSTIFICATION
Required Description
MATERIAL WILL BE IN ACCORDANCE WITH NAVICP ACTIVITY HX QUALITY CONTROL, MANUFACT