National Item Identification Number
12-146-8751
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D8046
DAIMLERCHRYSLER AG
ABT GSP/TIC HPC R823
STUTTGART
GERMANY
0711-17-83114
D8218
ROTZLER GMBH CO. KG
1165
STEINEN
GERMANY
07627-701-0
D3273
MAN NUTZFAHRZEUGE AG
DACHAUER STRASSE 667
MUENCHEN
80995
GERMANY
089-1580-01
D3273
MAN NUTZFAHRZEUGE AG
DACHAUER STRASSE 667
MUENCHEN
80995
GERMANY
089-1580-01
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D1343
VOITH TURBO GMBH & CO.KG
15 55
CRAILSHEIM
GERMANY
07951-32-0
Reference Numbers (Part Numbers)
DIN988-18X25X1
000988018001
0026460000
06.15114-2116
06151142116
18X25X1DIN
Required Categories
Required Description