National Item Identification Number
12-177-5671
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
C2311
BUNDESAMT FUER WEHRTECHNIK
UND BESCHAFFUNG
30 01 65
KOBLENZ
GERMANY
0261-400-0
D1839
BUNDESAMT FUER WEHRTECHNIK
UND BESCHAFFUNG
7360
KOBLENZ
GERMANY
0261-400-0
D9448
RHEINMETALL LANDSYSTEME GMBH
36 45
KIEL
GERMANY
0431-2185-01
Reference Numbers (Part Numbers)
2300002-181600.010
2300002-181600.010
2300002-181600.010
Required Categories
Required Description