National Item Identification Number
12-181-0753
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D8266
MTU FRIEDRICHSHAFEN GMBH
FRIEDRICHSHAFEN GMBH
MAYBACHPLATZ 1
FRIEDRICHSHAFEN
88045
GERMANY
07541-90-0
D9182
D8015
BOSCH ROBERT GMBH
GESCHAEFTSBEREICH KH
41 09 60
KARLSRUHE
GERMANY
0721-942-2254
Reference Numbers (Part Numbers)
000N05380
000N05380/1
1410102624
Required Categories
Required Description
