National Item Identification Number
12-314-1680
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D3041
BUERLING JOSEF GMBH & CO. KG
HAUPTSTRASSE 24
ASBACH
53567
GERMANY
02683-31992
D8015
BOSCH ROBERT GMBH
GESCHAEFTSBEREICH KH
41 09 60
KARLSRUHE
GERMANY
0721-942-2254
A4249
IVECO SPA - DIV. VEICOLI DIFESA
VIA A. VOLTA 6
BOLZANO
39100
ITALY
00390471/905111
F6573
RENAULT TRUCKS
99 RTE DE LYON
SAINT PRIEST
69800
FRANCE
04 72 96 75 75
A4249
IVECO SPA - DIV. VEICOLI DIFESA
VIA A. VOLTA 6
BOLZANO
39100
ITALY
00390471/905111
Reference Numbers (Part Numbers)
1460100329
1460100329
7001 5310123141680
7701025289
79071378
Required Categories
Required Description