National Item Identification Number
14-040-6703
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F0111
F0188
BLANC AERO INDUSTRIES
193 R DE BERCY
PARIS 12
75012
FRANCE
0
F0350
TPC DIVISION DE AVX CORPORATION
AV COLONEL PRAT
SAINT APOLLINAIRE
21850
FRANCE
03 80 71 74 00
F0555
MBDA FRANCE
37 BD DE MONTMORENCY
PARIS 16EME
75016
FRANCE
0134883000
F0555
MBDA FRANCE
37 BD DE MONTMORENCY
PARIS 16EME
75016
FRANCE
0134883000
F0111
F0188
BLANC AERO INDUSTRIES
193 R DE BERCY
PARIS 12
75012
FRANCE
0
F0434
EUROFAST
193 RTE DE BERCY
PARIS 12
75000
FRANCE
01 44 67 85 85
Reference Numbers (Part Numbers)
L23111-40BCL
L23111-40BCL
L23111-40BCL
L23111-40BCL
L23111-40BCL
0212417W00
Required Categories
Required Description