National Item Identification Number
14-216-1823
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F0422
F0111
F0111
F0188
BLANC AERO INDUSTRIES
193 R DE BERCY
PARIS 12
75012
FRANCE
0
F0422
F0086
EADS SOCATA
TARBES LOURDES PYRENEES
LOUEY
65290
FRANCE
05 62 41 73 00
F0228
Reference Numbers (Part Numbers)
AR77-20N
L23111-50CC
T035-440
23111CC050
23111CC050
23111CC050
260997A
42
Required Categories
Required Description
