National Item Identification Number
14-277-1597
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F0553
INTERTECHNIQUE
61 R PIERRE CURIE
BP 1
PLAISIR
78370
FRANCE
01 30 54 82 00
F0553
INTERTECHNIQUE
61 R PIERRE CURIE
BP 1
PLAISIR
78370
FRANCE
01 30 54 82 00
F0553
INTERTECHNIQUE
61 R PIERRE CURIE
BP 1
PLAISIR
78370
FRANCE
01 30 54 82 00
F0553
INTERTECHNIQUE
61 R PIERRE CURIE
BP 1
PLAISIR
78370
FRANCE
01 30 54 82 00
F1958
LIEBHERR AEROSPACE TOULOUSE SA
408 AV DES ETATS UNIS
BP 2010
TOULOUSE
31200
FRANCE
05 61 35 28 28
F0553
INTERTECHNIQUE
61 R PIERRE CURIE
BP 1
PLAISIR
78370
FRANCE
01 30 54 82 00
Reference Numbers (Part Numbers)
1C0-5LAIT0N
1C5-10LAITON
100-5LAIT0N
121521-8
123-14190-008
2-6X5X0-SMEL1CL
Required Categories
Required Description
