National Item Identification Number
14-449-8160
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
FAHF7
SODEXIM
10 R DU GRAND PRE
MUIZON
51140
FRANCE
03 26 02 91 11
F6432
LOHR
29 R DU 14 JUILLLET
HANGENBIETEN
67980
FRANCE
03 88 38 98 00
F0110
AFNOR ASSOCIATION FRANCAISE DE NORMA
ISATION
11 AV FRANCIS DE PRESSENSE
LA PLAINE ST DENIS
93500
FRANCE
01 41 62 80 00
F0110
AFNOR ASSOCIATION FRANCAISE DE NORMA
ISATION
11 AV FRANCIS DE PRESSENSE
LA PLAINE ST DENIS
93500
FRANCE
01 41 62 80 00
F6481
THALES
45 R DE VILLIERS
NEUILLY SUR SEINE
92200
FRANCE
01 53 77 80 00
D9182
Reference Numbers (Part Numbers)
A03070225
A03070225
E25514B60ZTA
E25514B60ZTA
S1ZT060A
99148284
99152524
Required Categories
Required Description
