National Item Identification Number
17-105-7473
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
H3500
PHILIPS ELECTRONICS NEDERLAND B.V.
GROENEWOUDSEWEG 1
EINDHOVEN
5621 BA
NETHERLANDS
040-2791111
H0002
PHILIPS ELECTRONICS NEDERLAND B.V.
BV
BOSCHDIJK 525
90050
EINDHOVEN
5621 JG
NETHERLANDS
040-2668200
H3500
PHILIPS ELECTRONICS NEDERLAND B.V.
GROENEWOUDSEWEG 1
EINDHOVEN
5621 BA
NETHERLANDS
040-2791111
H0P56
STIRLING CRYOGENICS & REFRIGERATION
BV
SCIENCE PARK EINDHOVEN 5003
SON
5692 EB
NETHERLANDS
040-2677300
Reference Numbers (Part Numbers)
4022-939-4362
4022-939-4362
40229394362
40229394362
402293943620
4022939436
Required Categories
Required Description
