National Item Identification Number
00-209-0552
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
07843
BOGEN COMMUNICATIONS INC
50 SPRING STREET
RAMSEY
NJ
07446
201-995-3029
73734
FEDERAL SCREW PRODUCTS INC
9742 W FOSTER ST
ROSEMONT
IL
60018
773-992-2600
1VN02
AIRDALE EXPRESS LLC
502 STARKSTONE CT
SPRING
TX
77386
281-419-9444
94033
1LQK8
AGILENT TECHNOLOGIES INC
DIV AGILENT BUSINESS CENTER
9780 S MERIDIAN BLVD
ENGLEWOOD
CO
80112
800-829-4444
28480
1LQK8
AGILENT TECHNOLOGIES INC
DIV AGILENT BUSINESS CENTER
9780 S MERIDIAN BLVD
ENGLEWOOD
CO
80112
800-829-4444
28480
1LQK8
AGILENT TECHNOLOGIES INC
DIV AGILENT BUSINESS CENTER
9780 S MERIDIAN BLVD
ENGLEWOOD
CO
80112
800-829-4444
28480
Reference Numbers (Part Numbers)
H1230-31
105-660
1452
1452ADX
149037-2
3050-0071
3050-0071
512-101
512-1
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
COPPER ALLOY OVERALL
NICKEL OVERALL
0.151 INCHES MINIMUM AND
0.161 INCHES MAX
