National Item Identification Number
00-810-0524
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
61178
TUTHILL CORPORATION
DBA TUTHILL PUMP GROUP
12500 S PULASKI RD
ALSIP
IL
60803
708-389-2500
72386
FELTERS CO THE
22 WEST ST
MILLBURY
MA
01527
508-865-2766
Reference Numbers (Part Numbers)
0L516
28328
28328
46096240
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
WOOL COMP 12R3X OVERALL
C-F-206,TYPE 1,CL 12R3 FED SPEC SINGLE MATERIAL RESPONS