National Item Identification Number
00-810-0804
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D9182
58553
SUPERIOR VALVE CO
2200 N MAIN ST
WASHINGTON
PA
15301
724-225-8000
73680
GARLOCK INC.
DBA GARLOCK SEALING TECHNOLOGIES
1666 DIVISION ST
PALMYRA
NY
14522
800-448-6688
Reference Numbers (Part Numbers)
P1200-6T
P1200-6T
8764
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
0.375 INCHES NOMINAL
1 ROUND
0.719 IN